TPR Systems RH 65 resin is a solvent free, fast curing MMA resin of very low viscosity. It is used for indoor screeds of 5-20 mm on concrete to equalize an uneven concrete surface. Screeds must be overlayed with a TPR Systems coating system according to System A – E. The fast curing time of 1 hour, flexibility and filler rich formulation of 1 : 8 makes the mortar economical and can be applied at temperatures between 0 °C and +35 °C (refer to table of hardener).

Hot water loadings must be limited to +60 °C. Excess temperature up to +80 °C will be accepted for a short moment as long as the temperature of the complete layer does not adopt the higher degree.

Application
Additional Technical documentation is available.

If you do not see the link below then please request access.

This content is for members only.